Discover our main brands websites

Arkema worldwide

en
top

A-Z Index

Rhealis™

  • Product range

Coatex proposes a toolbox of dedicated additives focused on the needs of the construction industry.

Rhealis™ 100 is dedicated to vibrocompacting concrete whereas Rhealis™ DFOAM is the perfect defoamer for your Ethacryl™.

Rhealis™ 2449 ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

For more information, visit our product selector.

Rhealis™ 100

  • Product

Rhealis™ 100 is an additive for vibrocompacting concrete specially adapted to the pavements and other block manufacturing.

It increases the water content with same behavior during the block manufacturing, allows the reduction of the cement content, the increase of the block’s strength and provides better surface quality of the final product. It provides excellent workability.

Liquid, easy to formulate.

Rhealis™ 2449

  • Product

This dispersant of extenders and inorganic pigments allows a complete dispersion at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Rhealis™ DFOAM

  • Product

Rhealis™ DFOAM is a foam control additive highly recommended for use in combination with Ethacryl™ products in concrete admixtures and in gypsum wallboard manufacturing.

It is a liquid type defoaming agent, efficient at low dosage and easily dispersible.

Rheocarb™

  • Product range

Rheocarb™ a complete range for reformulation while keeping paper or board properties.

They provide an improvement of runnability, higher solids content coating, good water retention and low elasticity at medium levels of Brookfield viscosity.

Used for coated papers and boards quality.

They can comply with food contact regulation.

For more information, visit our product selector.

Rheocarb™ 101

  • Product

Rheocarb™ 101 maintains particles (pigments and latex) state of dispersion with full gloss potential.

It provides a good water retention even at low viscosity level and is a strong OBA carrier.

It allows the reduction of drying and calendering costs and of coating colors costs (use of cost efficient pigments, binders and other additives).

Use in top coats with medium to high solids content and film press coating in place of starch and in order to reduce elasticity and the risks of misting.

Rheocarb™ 121

  • Product

Rheocarb™ 121 maintains particles (pigments and latex) dispersion with full gloss potential and strong thickening power.

It provides a good water retention and is a strong OBA carrier.

It allows the reduction of drying and calendering costs and  of coating colors costs (use of cost efficient pigments, binders and other additives).

Use in top coats made of slightly coarser pigments and lower solids content and film press coating in place of starch and in order to reduce elasticity and the risks of misting.

Rheocarb™ 131

  • Product

Rheocarb™ 131 maintains particles (pigments and latex) dispersion with full gloss potential and strong thickening power.

It provides a good water retention and is a strong OBA carrier.

It allows the reduction of drying and calendering costs and of coating colors costs (use of cost efficient pigments, binders and other additives).

Use in mat & silk top coats, board coats at lower solids.

Rheocarb™ J 40

  • Product

Rheocarb™ J 40 is a ready to use non ionic rheology modifier that can provide good levels of water retention without flocculating the pigments and without increasing the viscosity.
It is designed for Ink Jet coating colors that include cationic or anionic additives.
Rheocarb™ J 40 improves coating runnability at maximum solids and coated papers printability.


 

Rheocoat™

  • Product range

Rheocoat™ is a range of alkali swellable emulsions (ASE and HASE) focused on water retention improvement and coating color’s solids stabilization.

They work on blade load control and coating defects treatment: bleeding, misting, orange peel, jet instability.

They can comply with food contact, paper and board regulations.

For more information, visit our product selector.

Rheocoat™ 27

  • Product

Rheocoat™ 27 is a thickener with moderate thickening power and outstanding water retention properties for coated paper and board.

Rheocoat™ 27 is prefered when the demand of water retention is crucial.

Well suited to coating colors with coarser pigments.

Fast swelling thickener, Rheocoat™ 27 helps to reduce pH shocks and agglomerate risks.

Well adapted to all types of coating kitchen.
Ready to use semi neutralized emulsion.

Rheocoat™ 35

  • Product

Rheocoat™ 35 is a strong thickener at low and high shear rates and confers a very good water retention aid.

It enables solids stability in blade coating for precoats and topcoats and helps keeping the blade or metering bar load sufficient for a good control of the profile and coat weight.

Can be use in board coating for high water retention demand.

Ready to use acidic emulsion of acrylic copolymer.

Rheocoat™ 66 SN

  • Product

Rheocoat™ 66 SN provides exceptionnal runnability thanks to an optimized rheological balance with superior water retention.

It improves cost/performance ratio: outstanding thickening efficiency, allowing to reach targeted viscosities at low dosage.

Can be use in blade coating for precoats and topcoats or board coating.

Ready to use acidic emulsion of acrylic copolymer.

Rheocoat™ 93

  • Product

Rheocoat™ 93 is an associative thickener.

It improves cost/performance ratio: low amounts even at medium/low solids.

Can be use for high speeds machines and low coat weights (magazine papers), blade loads decrease and thickening of pre coats or medium coats containing coarse pigments.

Ready to use acidic emulsion of acrylic copolymer.

Rheosolve™ D

  • Product range

Rheosolve™ D is a line of polymeric dispersants with proven anti-scaling efficiency for dishwashing, laundry detergents, hard surface cleaners.
Rheosolve™ D products are available worldwide with local production facilities.

Fore more information, visit our product selector.

Rheosolve™ D 15AS

  • Product

RHEOSOLVE™ D 15AS is a highly effective dispersing agent specifically designed for phosphate free automatic dishwashing formulations.

It prevents filming and spotting on all kind of surfaces including glasses.

It also improves shine and soil removal.

RHEOSOLVE™ D 15AS is compatible with ecolabels.

It is a ready to use acid polymer in liquid form. It is available in granulated form as well under the name RHEOSOLVE™ D 15ASG.

Rheosolve™ D 15ASG

  • Product

RHEOSOLVE™ D 15ASG is a highly effective dispersing agent specifically designed for phosphate free automatic dishwashing formulations.
It prevents filming and spotting on all kind of surfaces including glasses.

It also improves shine and soil removal.

RHEOSOLVE™ D 15ASG is compatible with ecolabels. It is a ready to use acidic polymer in granulated form.

It is available in liquid form as well under the name RHEOSOLVE™ D 15AS.

Rheosolve™ D 5AS

  • Product

Rheosolve™ D 5AS is an effective dispersing agent.

It prevents soil and mineral redeposition, shows good chlorine compatibility and insure good anti-precipitating properties.

Use in domestic and industrial dishwashing, liquid laundry formulations, all-purpose cleaners, tablets, disinfectants.

It contributes to the granting of Ecolabels: non hazardous, non toxic and non pollutant.

Polyacrylic acid.

Rheosolve™ D 5S

  • Product

Rheosolve™ D 5S is an effective dispersing agent.

It prevents soil and mineral redeposition, shows good chlorine compatibility and insure good anti-precipitating properties.

Use in domestic and industrial dishwashing, liquid laundry formulations, all-purpose cleaners, tablets, disinfectants.

It contributes to the granting of Ecolabels: non hazardous, non toxic and non pollutant.

Sodium polyacrylate.

Rheosolve™ T

  • Product range

Rheosolve™ T is a line of rheology modifiers dedicated to control the rheological behavior of all types of liquid formulations for dishwashing, laundry detergents & hard surface cleaners. A wide spectra of formulation challenges can be addressed: suspension of particles, sprayability, alkaline and acidic pH conditions, high surfactant and high electrolytes contents.

For more information, visit our product selector.

Rheosolve™ T 450

  • Product

Rheosolve™ T 450 is compatible with many acids such as citric, phosphoric, formic, lactic and also with hydrogen peroxyde formulations.

It is efficient on a large range of pH and in formulation with a large array of products without the use of co-formulation additives.

Use in abrasives pastes, scrubbing creams, all-purpose cleaners (hard surfaces, oven, grill cleaners, acid formulations), ideal for toilet cleaners and production of self wetting formulas without surfactant addition.

Easy to handle liquid.

Rheosolve™ T 633

  • Product

Rheosolve™ T 633 is an highly versatile thickener at high pH.

It is a liquid thickener with good suspending power.

Use in abrasives pastes, scrubbing creams, all-purpose cleaners (hard surfaces, oven, grill cleaners, acid formulations) and for the stabilization of highly concentrated suspension such as calcium carbonate.

It contributes to the granting of Ecolabels.

Rheosolve™ T 635

  • Product

Rheosolve™ T 635 is a liquid thickener providing very good storage stability, strong holding power on vertical surfaces and thixotropic thickening efficiency.

Use in scrubbing cream formulation, abrasives pastes, all-purpose cleaners (hard surfaces, oven, grill cleaners, acid formulations).

It contributes to the granting of Ecolabels.

Rheosolve™ T 637

  • Product

Rheosolve™ T 637 is a liquid thickener providing very high thickening effect at rest with low viscosity under shear.

It allows viscosity adjustement.

Use in abrasives pastes, scrubbing creams, all-purpose cleaners (hard surfaces, oven, grill cleaners, acid formulations).

It contributes to the granting of Ecolabels.

Rheosolve™ T 650

  • Product

Liquid thickener used for high concentration surfactant formulation


Medium to high pH formulations


Used in enzyme based ADW liquids

Rheosolve™ T 700S

  • Product

Rheosolve™ T 700S is a rheology modifier dedicated to thicken and suspend particles in all type of home care, household or industrial and institutional cleaning products. Rheosolve™ T 700S has an excellent ability to suspend particles in fluid formulations and provides a smooth flow. It fosters the dispersion of all type of particles without the need of dispersant.

Rheosolve™ T 700S is a liquid polymer, easy to use in cold process.

Rheosolve™ T 701S

  • Product

Rheosolve™ T 701S is a rheology modifier dedicated to thicken and suspend particles in all type of home care, household or industrial and institutional cleaning products. Rheosolve™ T 701S has an excellent ability to suspend particles in fluid formulations and provides a smooth flow. It fosters the dispersion of all type of particles without the need of dispersant.


Rheosolve™ T 701S is a liquid polymer, easy to use in cold process.

Rheosperse™

  • Product range

Rheosperse™ are specially designed to maximize the efficiency of your process. Our expertise is to disperse and stabilize all types of minerals in water phase at high concentrations.
Coatex continue to develop tailor made solutions for specific minerals suspensions requirements.

For more information, visit our product selector.

Rheosperse™ 144 A

  • Product

Rheosperse™ 144 A is an ideal choice for rutile titanium dioxide slurry producers.

A robust solution designed with the specific behaviour of TiO2 slurries in mind, it can be used to produce stable slurries on a wide variety of titanium dioxide coming from chloride or sulphate manufacturing processes and different surface treatments.

Rheosperse™ 1507

  • Product

Rheosperse™ 1507 is specially designed for aqueous dispersions of calcium silicate and allows the production of high-solids stable suspensions and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 1712

  • Product

Rheosperse™ 1712 is especially designed to disperse Bauxite.

This polymer is really efficient at low level of use and provides high solids slurries with low Brookfield viscosity.

Rheosperse™ 3002

  • Product

Rheosperse™ 3002 is especially designed for aqueous dispersions of clays.

It can be used on a wide variety of clays coming from different deposits.

 

 

Rheosperse™ 3010

  • Product

High efficient dispersing agent for kaolin clays.

Rheosperse™ 3010 fits with a wide variety of kaolin clays coming from different deposits, is a cost effective alternative to phosphates.

Especially designed to disperse kaolin clays with high specific surfaces, fine to ultra fine.

Very efficient, low level of use needed.

It provides excellent storage stability.

Liquid, ready to use dispersing agent.

Rheosperse™ 3012

  • Product

Rheosperse™ 3012 was developed for secondary kaolin clays.

It can be used on a wide variety of fine grained and lamellar particles coming from different locations.

 

 

Rheosperse™ 3030

  • Product

Rheosperse™ 3030 is specially designed to provide to kaolin clay slurries the lowest viscosity required for purification step for raw materials containing impurities.

Rheosperse™ 3080

  • Product

Rheosperse™ 3080 can be used efficiently for calcined clay grinding process.

Rheosperse™ 3080 provides high solids content slurries with excellent storage stability.

Rheosperse™ 3206

  • Product

Rheosperse™ 3206 can be used for wet grinding of CaCO3.

Rheosperse™ 3206 especially designed for slurries production with coarse to medium particle size. 

Rheosperse™ 3220

  • Product

Rheosperse™ 3220 dispersant is especially suitable to produce stable and fluid slurries of calcium carbonate at medium to high solids content for coarse particle sizes.


it ensures to slurries a storage stability of 1 week minimum.

Rheosperse™ 3246

  • Product

Rheosperse™ 3246 is a fully neutralized grinding aid especially suitable to produce stable and fluid ground calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra fine.

It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3248

  • Product

Rheosperse™ 3248 is an acidic grinding aid especially suitable to produce stable and fluid calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra-fine.


It ensures to slurries storage stability of 1 week minimum.
In addition, it can be used in combination with alkali solutions such as NaOH.

Rheosperse™ 3266

  • Product

Rheosperse™ 3266 is a partially neutralized grinding aid especially suitable to produce stable and fluid calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra-fine.

It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3280

  • Product

Rheosperse™ 3280 is especially suitable to produce stable and fluid slurries at medium to high solid content for fine PCC.

Rheosperse™ 3280 allows strong efficiency at low amount to maximize your cost in use.

Rheosperse™ 3288

  • Product

Rheosperse™ 3288 is a grinding aid at pH 6, especially suitable to produce stable and fluid slurries at medium to high solids content with a range in particle sizes from coarse to fine.

It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3310

  • Product

Rheosperse™ 3310 is a versatile dispersant for aqueous suspension of various insoluble minerals.

It can be used with a wide range of minerals coming from different deposits.

Rheosperse™ 3345

  • Product

Rheosperse™ 3345 is specially designed for aqueous dispersions of bentonites.

It can be used on a wide variety of bentonites coming from different deposits.
Rheosperse™ 3345 provides high-solids stable slurries and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3350

  • Product

Rheosperse™ 3350 dispersant is especially suitable to produce stable and fluid suspensions of fertilizers at medium to high solids content with a range of particles sizes from coarse to fine.

It ensures the slurry storage stability of 1 week minimum

Rheosperse™ 3360

  • Product

Rheosperse™ 3360 is a cost effective solution for mineral dispersions at acidic pH.

Very efficient at low amount to maximize suspension stability at high solids content.

Rheosperse™ 3410

  • Product

Rheosperse™ 3410 is a polyacrylate dispersant which is used to disperse inorganic materials in waterborne system.

Its chemistry that uses an ionic repulsion mechanism to disperse minerals in water can be efficiently implemented in association with a non-ionic surfactant to produce talc slurry at high solids content.

Rheosperse™ 3450

  • Product

Dispersing agent for talc slurries.

Rheosperse™ 3450 has a very efficient dispersing effect on talc, it has a wetting effect.

It reduces the use of surfactant with low level of use.

Rheosperse™ 3640

  • Product

Rheosperse™ 3640 is dedicated for TiO2 wet grinding process at high solid content before mineral and/or organic surface coating.


Less sensitive when TiO2 pH varies.

Rheosperse™ 3840

  • Product

Rheosperse™ 3840 is a dispersant developed for dispersion process of sparingly soluble minerals in water. It provides low viscosity and good stability to high solid content Mg(OH)2 suspension.  

Rheosperse™ 4050

  • Product

Rheosperse™ 4050 improves dispersion of Calcium Hydroxide in water at high concentrations.

Rheosperse™ 4050 is not affected by high salt concentrations and can be used in a wide range of alkaline pH. 

Rheosperse™ S 300

  • Product

Rheosperse™ S 300 is a pseudo plastic thickener providing high yield value.


It is an effective viscosity builder that prevents sedimentation.

Rheosperse™ S 301

  • Product

Rheosperse™ S 301 is a highly pseudo plastic thickener providing high yield value and therefore is an effective viscosity builder for high solids content mineral suspensions.

Rheostyl™

  • Product range

Rheology Modifiers for next generation cleansing formula
Today’s body and facial wash as well as shampoo bring more than cleansing, they must be visually attractive with color, transparency, particles, glitters… and provide beauty benefits. The creation of such formulations can be quite challenging.
Rheostyl™ line addresses these needs and offer a great flexibility to the formulators with easy to use acrylic waterborne emulsions.

For more information, visit our product selector.

Rheostyl™ 100 rheology modifier

  • Product

Rheostyl™ 100 is a rheology modifier highly efficient to thicken and suspend oils & particles across a wide category of applications. In rinse-of, it can be used all over the pH range (3 to 12) & is compatible with all type of surfactant & soap-based formulas. In Skin Care, Sun Care or Color Cosmetic, Rheostyl™ 100 is excellent to formulate thin gels & emulsions including particles or pigments. It has an excellent tolerance to electrolytes & allows to formulate very fine spray. 


 

Rheostyl™ 85 L - INCI: Acrylates copolymer

  • Product

Rheostyl™ 85 L provides excellent clarity, suspension and thickening to low pH cleansing products formulated with natural preservatives. Versatile and easy to formulate, it only needs a one-step neutralization process and no back-acid technique.

Rheostyl™ 90 N - INCI: Acrylates/Beheneth-25 Methacrylate copolymer

  • Product

Rheostyl™ 90 N combines very high thickening efficiency with unique crystal clear appearance.

It allows the design of outstanding perfectly transparent formulations with honey like flow.

It will preferably be used in

 
  • purely clear shower gels, shampoos, facial cleansers,
  • challenging surfactants systems such as mild low surfactant content or sulfate free formulas.

Rheostyl™ E

  • Product range

Inspired by the growing trend of “clean beauty” & minimalist formulations, Rheostyl™ E is a new line of polymeric emulsifiers combining the benefits of traditional emulsifiers & polymers:
·       Powerful emulsification, smooth texture & unique sensorial
·       Flexibility of formulation, easy process and water resistance

Rheostyl™ E polymers will simplify your formulation and provide with one INCI name 6 functionalities:
·       EMULSIFICATION without the need of co-emulsifiers
·       TEXTURE from mist to bouncy cream
·       SUSPENSION of oil & mineral UV filters
·       DISPERSION: Outstanding compatibility with mineral UV filters
·       SPREADING: Even coverage of the skin thanks to fine dispersion of UV filters
·       WATER RESISTANCE combined with nude skin afterfeel.

For more information, visit our product selector.

Rheostyl™ E-Cream

  • Product

Rheostyl™ E-Cream is a multifunctional polymeric emulsifier combining the benefits of traditional emulsifiers & polymers. It is dedicated to formulate fluid to thick emulsions that can be sprayable. Thanks to its excellent resistance to electrolytes it has a rich & cushion sensoriality. It allows to develop ‘emulsifier-free’ formulas & provides a very good water resistance. Rheostyl™ E-Cream is a liquid polymer that can be cold processed at low shear rate and emulsify all kind of oils.

Rheostyl™ E-Light multifunctional polymeric emulsifier

  • Product

Rheostyl™ E-Light is a multifunctional polymeric emulsifier combining the benefits of traditional emulsifiers & polymers. It is dedicated to formulate thin & sprayable emulsions with a light & fresh feel. The polymeric nature of Rheostyl™ E-light allows to develop ‘emulsifier-free’ formulations & provides an outstanding water resistance with a nude skin finish. Rheostyl™ E-Light is a liquid polymer that can be cold processed at low shear rate and emulsify all kind of oils.

Rheostyl™ UP

  • Product

Rheostyl™ UP is a highly efficient suspending agent to stabilize oil in water emulsions and suspend pigments in fluid formulations. It is a ready to use rheology modifier in liquid form helping to increase production rate and promote energy saving with cold process. It can tolerate high dosage of alcohol to formulate hydro-alcoholic gels for hand sanitizing.

Rheotech™

  • Product range

A full range of HASE (Hydrophobically modified Alkali Swellable Emulsions) type rheology modifiers with advantages during the:
·       Formulation: ease of use, high efficiency,
·       Storage: in-can appearence, syneresis control,
·       Application: optimum results with tinting systems, improved feel of application, spatter resistance, film build, body and texture.
Besides, they offer an excellent alternative to HEC thickeners.

For more information, visit our product selector.

Rheotech™ 2000

  • Product

Newtonian rheology profile balanced between high and low shear viscosities (ICI builder), Rheotech™ 2000 provides superior film build, without roller spatter.

It improves flow and leveling whilst retaining sag resistance, gloss and gloss retention and compatibility with pigment dispersions

Rheotech™ 2000 is designed for gloss and semi-gloss paints, matt paints combined with another thickener.

For more information or product, visit our product selector.

Rheotech™ 2800

  • Product

Newtonian to balanced rheology profile, Rheotech™ 2800 provides outstanding appearence & creaminess to paints with great application comfort. The sag/leveling compromise is improved together with easy finishing touches (touch up) and good water resistance.

It shows remarkable properties to tinting systems.

Rheotech™ 2800 is designed for semi-gloss paints, one coat matt paints.

For more information or product, visit our product selector.

Rheotech™ 3800

  • Product

Balanced rheology profile effective at medium shear rates (KU Builder), Rheotech™ 3800 improves rheology and color acceptance of water based formulations, it controls the perceived quality at handling and application by roll or by brush, especially for finishing touches

It shows high efficiency and robustness to use with various latex technologies.

Rheotech™ 3800 is designed for matt and semi-matt paints.

For more information or product, visit our product selector.

Rheotech™ 4200

  • Product

Rheotech™ 4200 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 4200 ensures safe additions of colorants in water based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 4200 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations. For more information or product, visit our product selector.

Rheotech™ 4800

  • Product

Pseudoplastic rheology profile for high values viscosities at low shear together with a valuable appearance, Rheotech™ 4800 shows unmatched effectiveness, is safe towards colorants, limiting viscosity changes and rub-out issues. It provides great application comfort, sag/leveling compromise, easy finishing touches (touch up) with good water resistance. Rheotech™ 4800 is designed for matt paints, thick film and textured coatings, formulations with a very low binder content. For more information or product, visit our product selector.

Rheotech™ M 03

  • Product

Rheotech™ M 03 is a highly effective associtive acrylic thickener especially designed for water-based putties and textured coating formulations. Rheotech™ M 03 provides high viscosities at low and medium shear rate thinning behaviour. It is therefore giving a good body and high build to formulations while echibiting ease of application. For more information or product, visit our product selector.

Rilsamid® Polyamide 12 Resin

  • Product

For over 40 years, Rilsamid® polyamide 12 resin fulfills the highest standards thanks to its combination of physical, chemical and mechanical properties. Rilsamid® PA12 resin is particulary well suited for different processing technologies: extrusion, injection, and blow-moulding processes.


Due to versatility and outstanding properties, Rilsamid® resin meets the quality requirements of a wide range of markets: automotive, electric and electronic, industrial and sport applications.

Rilsan® Polyamide 11 Resin

  • Product

Produced from castor oil, Rilsan® PA11 resin is a high-performance polymer of 100% renewable origin.  


Rilsan® PA11 resin has been a trusted source of performance in highly demanding applications for 70 years. Since its beginning, it has been synonymous with performance and durability.

Rilsan® Fine Powders

  • Product

Rilsan® Fine Powders are highly durable thermoplastic polyamide powders. These powders have been developed for metal coating but are also used as additives in various applications.  

Rilsan® Matrix

  • Product range

Rilsan® Matrix is a series of high temperature, high performance polyamide resins especially designed for light weight automotive composites. These resins are filled with either carbon fibers or glass fibers and are supplied in the form of unidirectional tapes. They enable the manufacture of composite parts using new and innovative processes designed for the high output requirements of this industry.

Rilsan® Polyamide Family

  • Product range

High performance polyamides that deliver toughness, flexibility, chemical resistance, and permeation resistance. Many grades are bio-based. Includes Rilsan®, Rilsamid®, Orgasol®, Orgalloy®, Platamid®, and Tieflex product lines.

Rosinox® for rosin bleaching

  • Product

Rosinox® is a bleaching agent and catalyst for disproportionation of rosin and rosin esters. Supplied by MLPC International, Rosinox® is a low molecular weight alkylphenol disulfide oligomer that contains 31.5% of sulfur.