Discover our main brands websites

Arkema worldwide

top

A-Z Index

AZDN, Additives for polymers and resins

  • Product range

As derivatives of Hydrazine Hydrate, the azo-bis-Isobutyronitrile, AZDN or AIBN, is used as blowing agent for PVC foam, or as polymerization initiator for synthesis of flocculant agents in water treatment.

 

 

Accolade®

  • Product

Accolade® soil fumigant - dimethyl disulfide (DMDS) based soil fumigant, used for shank applications in fruits, vegetables and horticultural crops.


 


Accolade® enables a significant increase in marketable yield thanks to its broad spectrum efficacy against nematodes, weeds and soil-borne plant pathogens. An integrated pest management program based on Accolade® has globally demonstrated crop yields comparable to methyl bromide, at a distinctly lower cost to the grower.

Accolade® and Paladin®, your premier and sustainable solutions for agricultural soil fumigation

  • Product range

Arkema has developped Accolade® and Paladin® as fumigation solutions in various countries with a broad spectrum of effectiveness (nematicide, herbicide, fungicide). Used for the preparation of horticultural soils, DMDS (dimethyl disulphide) has a proven track record of significant yield improvement. This sustainable generation of treatment is based on dimethyl disulphide (DMDS), a substance derived from sulphur that occurs naturally in the environment. Our solution is available in 2 applications, shank or drip and is combined to a barrier film which the manufacture is completely designed by Arkema for  a safe and efficient use.

 

 

 

 

Accolade®EC

  • Product

Accolade®EC soil fumigant – emulsified soil fumigant based on dimethyl disulfide (DMDS), used for drip applications in fruits, vegetables and horticultural crops.


 


Accolade®EC enables a significant increase in marketable yield thanks to its broad spectrum efficacy against nematodes, weeds and soil-borne plant pathogens. An integrated pest management program based on Accolade®EC has globally demonstrated crop yields comparable to methyl bromide, at a distinctly lower cost to the grower.


 

Acrylic acid

  • Product

Acrylic acid is a colorless liquid above its freezing point of +13°C ( +56°F). It is fully miscible in water at +20°C (+68°F).
Acrylic acid will polymerize to form homopolymers and can be copolymerized with their esters and other vinyl monomers. Its carboxylic acid functionality provides anionic character and reactivity with alcohols and epoxides.

Acrylic monomers

  • Product range

Arkema is a leading global producer of acrylic monomers. Thanks to their unique properties acrylic monomers improve every day life by making products last longer, allowing water based formulations wihout solvents and a cleaner environment.

Adame®

  • Product

Adame® is produced by transesterification.
Cationic nature linked to the tertiary amino functionality, which can be enhanced by quaternization of the tertiary amine.
Adame® is mainly used for production of cationic monomers (Adamquat).
Ability to polymerize and copolymerize.

Adamquat MC 80

  • Product

Adamquat brings cationic charge to polymers.
Monomers and homopolymers are water-soluble.
They have a good copolymerizability with Acrylamide.
The main market is the production of cationic polyacrylamides used as flocculent for wastewater and sludge treatment, paper retention and drainage aids and wet and dry strength for paper sheet formation.

Additives for PVC - Durastrength® Acrylic Impact Modifiers

  • Product range

As an industry standard for over 40 years, Durastrength® acrylic impact modifiers have constantly evolved to fit the needs of changing PVC applications around the world.  The Durastrength® 200 & 300 series are designed for PVC window profile, siding, and pipe.  Released in 2013, Durastrength® 350 which provides high efficiency in rigid vinyl products. It is commonly used for vinyl window profiles, siding, fencing and more. 


 


Following on the successful launch of Durastrength® 350, Arkema is now offering in 2014 it's newest generation of PVC additives - Durastrength® 365, 365S, and 380.  All of the 3-series Durastrength®  modifiers are designed for low use levels while yielding superior performance in Charpy and falling weight tests.  Durastrength®  380 is specially formulated for Ca/Zn stabilized PVC and is also useful in flexible and CPVC.

Additives for PVC - Plastistrength® Acrylic Processing Aids

  • Product range

Plastistrength® acrylic process aids are used in many PVC applications including rigid foam, pipe, window profile, trimboard, and sheet.  Arkema's dedication to the PVC market around the globe has brought an intense research focus on new Plastistrength® products for foam and cellular PVC technologies.  Arkema's new Plastistrength® 559, 560, and 566 processing aids offer medium and high molecular weights that allow for low use levels, improving efficiency.  With improved efficiency, Plastistrength® 559, 560, and 566 will also yield better foam densities, cellular structure, and surface finish.


 


Traditional products such as Plastistrength® 550, 770, and L1000 are proven performers for calendared and extruded, rigid PVC.  Arkema's new Plastistrength® 557 and 559 are an improvement on these all-purpose products.  Plastistrength® 559 is a Ca/Zn one pack formulation for use in rigid PVC sheet applications.

Additives for Plastics - Clearstrength® MBS Impact Modifiers

  • Product range

Clearstrength® MBS impact modifiers are available around the world for use in engineering resins applications.  The Clearstrength® E-series has been developed to withstand severe processing conditions and bring high impact peformance especially at low temperatures. Applications include PC/ABS monitor housings, PC/PBT automotive bumpers, and PC cell phone housings among a host of others. Our new MBS Clearstrength® XT100 offers the possibility to bring impact performances in high performance composites and structural adhesives markets.

Additives for Plastics - Durastrength® Acrylic Impact Modifiers

  • Product range

Durastrength® acrylic impact modifiers have been an industry standard for over 40 years.  This is because of the excellent wide-open processing window and excellent weatherability in most plastics applications.  The newly released Durastrength® 480 acrylic modifier has been optimized for polycarbonate and its main alloys PC/PBT and PC/ABS.

Additives for Plastics - Plastistrength® Acrylic Processing Aids

  • Product range

Using Plastistrength® acrylic processing aids in your engineering resins formulations will improve fusion and melt strength, while still providing excellent lubricity.  If you are looking to optimize a PC, PC/ABS, or other alloy system to prevent sticking, burning, or anisotropy then contact us today to discuss Plastistrength® acrylic processing aids for plastics.

Adiansol®

  • Product range

The Adiansol® range contains polyether polyols with different functionalities. These products are based on glycerin, trimethylolpropane (TMP), propylene glycol or amines. The Adiansol® polyols are mainly used as crosslinkers and building blocks.

Agrochemical and pharmaceutical synthesis intermediates

  • Product range

Mercaptans can be used for some intermediate synthesis in agrochemical and pharmaceutical markets. Sodium methyl mercaptide (SMM), ethyl mercaptan (EM) and tertio-butyl mercaptan (TBM) are used worldwide to produce intermediates entering for instance in terbufos or phorate agrochemicals.


 


Arkema also produces AminesOxygenated Solvents and Hydrazine Hydrate that can be useful in synthesizing intermediates. 

Airsiev® Ox series

  • Product

The Airsiev® Ox series is a range of molecular sieves designed for oxygen production by PSA (Pressure swing adsorption) process with a broad range of performances (Airsiev Ox 8 and Ox 19).

Airsiev® P series

  • Product

The Airsiev® P series is a range of molecular sieves designed for air prepurification with four different performance ranges, for 140 minutes to 300 minutes of CO2 breakthrough (Airsiev P 140, P 180, P 220 and P 300).

Albone® hydrogen peroxide for industrial applications

  • Product range

Albone® is formulated for general hydrogen peroxide applications. It is mostly used in the bleaching of paper pulp and of natural and synthetic textile fibers, chemical synthesis, as well as environmental applications such as wastewater and gas treatment. It is also used in the mining and metal treatment industries.

Alpure® sodium chlorate

  • Product range

Alpure® sodium chlorate (NaClO3) by Arkema is a white crystalline solid produced from salt and water. This strong oxidant primarily serves for the generation of chlorine dioxide (ClO2), a key bleaching agent in the manufacturing of high quality chemical pulps for a large variety of papers and packaging applications.

Amine additives for coating

  • Product range

Our amines are used in the synthesis of resins or directly in the final paint formulation. They can be used as neutralising agents in waterborn paints or as anti-skin in alkyd paints.



All products listed below are available from stock. Arkema is also developing amines per customer request (from first grams samples to hundred tons).

Amine corrosion inhibitors

  • Product range

Our amine-based additives help to prevent corrosion in water systems (power plants, boilers...), metal working fluids or refineries. They can also act as neutralising agents or oxygen or hydrogen sulfide scavengers.

Amines additives for PVC polymerization control

  • Product range

Arkema offers various solutions for controlling PVC polymerization: our product range especially includes polymerization initiators, shortstoppers, emergency killers and blowing agents.

Amines catalysts for foundry

  • Product range

Arkema offers amines catalysts for the manufacture of molds in foundry by the « PU cold box » process. Those amines can be used alone or blended. Arkema conceived and patented specific products, Alpamine® F4520, F4620, F4680 that combine optimized efficiency and handling easiness to specifically address your needs.

Apolhya®

  • Product range

Apolhya® products are the only soft polyolefin based thermoplastic materials that can withstand high temperatures : 150° C and higher for over 3,000 hours. Special grafting processes and chemistry produce polyamide-grafted polyolefins having a unique co-continuous structure that provides for breakthrough properties. The Apolhya® range of products is suitable to the full spectrum of processing conditions (film casting, calendar and blown extrusion, injection moulding, etc.)