alphabetic-search

Arkema proposes a wide range of collectors with various chain lengths and polar heads used in flotation for minerals. They are commercialized under the tradenames Melioran^®/Noram^®/Noramac^®/Cataflot^®. These collectors are based on the following technologies: phosphate esters, fatty amines, fatty amine derivatives and cationic surfactant mixtures.

Forane^® FBA 1233zd is a high performance, low global warming potential (GWP) liquid blowing agent that is SNAP approved for most polyurethane (PU) applications, including residential appliance, commercial refrigeration, construction panels and doors, as well as spray foam. Forane^® FBA 1233zd is non-flammable, liquid blowing agent.

The Arkema Group is one of the world's top producers of fluorinated chemicals, including refrigerants as well as blowing agents, under the brand Forane^®.  Forane^® blowing agents are used for insulation in appliances and construction.

 

 

 

As a leading fluorochemical producer with global reach, Arkema is committed to supporting its customers through technical development, competitive solutions, and production investments. Fundamental to this commitment is Arkema’s well-established strategy to bring next-generation, low GWP technology to its global markets.

Forane®HTS 1233zd制冷剂不消耗臭氧，是一种全球变暖潜能值较低的HFO制冷剂。Forane®HTS 1233zd应用于离心式制冷机，展现出卓越的制冷剂平衡性，同时兼有制冷效率高、对环境影响小和不可燃的优点。Forane®HTS 1233zd制冷剂符合ASHRAE不易燃A1级标准。

Arkema is one of the world's top producers of fluorinated chemicals, under the Forane^® and Foranext^® brand, including refrigerants, blowing agents, and specialties. Arkema's refrigerants are used wherever cooling or refrigeration are required, including home air conditioners and heat pumps, appliances, automobiles, food processing, commercial refrigeration, industrial refrigeration, chillers, and supermarkets.
 

Forane^® 134a (R-134a) is a non-ozone depleting HFC with properties very similar to R-12. It can be used both as a pure refrigerant and as a component in refrigerant blends. R-134a is used in applications, including automotive air conditioning, chillers, medium temperature commercial refrigeration, refrigeration appliances, dehumidifier, and transport refrigeration.

Forane^® 22 refrigerant (R-22) is used in a broad range of applications, including residential and commercial air conditioning, refrigeration, chillers, room air conditioning, heat pumps, transport refrigeration, and other comfort cooling and refrigeration applications. R-22 is an HCFC and is going through a mandatory phase-out for manufacturing and importing by January 1, 2020, according to the Montreal Protocol. It will remain legal for end-users to purchase and use Forane^® 22 refrigerant in existing R-22 equipment past this date.  R-22 virgin and reclaim refrigerants are readily available and will be for years to come.  Retrofit refrigerants, such as Forane^® 427A - The EASY RETROFIT^TM, may be options for servicing existing R-22 installations.

 

* Due to global regulations, this product can no longer be used or purchased in the European Union *

Forane^® 32 is the main component of R-410A refrigerant. Mixed with the R-125 fluid, Forane^® 32 is behind the high efficiency of Forane^® 410A.
In order to offer a lower GWP refrigerant as a replacement for R-410A and to reduce its direct emission impact on global warming, Arkema is promoting Forane^® 32 as a stand-alone refrigerant for air conditioning and heat pump applications. Experiences and feedback from OEMs worldwide show that Forane^® 32 is an excellent candidate for these applications.

Forane^® 404A (R-404A) is a non-ozone depleting, near azeotropic blend of HFC refrigerants R-125, R-143a, and R-134a, and is formulated to match the properties of R-502, making it useful for a variety of medium and low temperature refrigeration applications. R-404A has been approved by many refrigeration compressor and system manufacturers for use in new refrigeration equipment, such as food display and storage cases, cold storage rooms, ice machines, transportation, and process refrigeration.

Forane^® 407A (R-407A) is a non-ozone depleting, zeotropic blend of HFC refrigerants R-32, R-125, and R-134a.  Forane^® 407A is a lower GWP refrigerant, designed for the replacement of R-404A and R-507A (retrofit and new equipment) in medium and low temperature refrigeration. Common applications include supermarket refrigeration, refrigerated transports, and food processing. R-407A can also be used as an R22 retrofit for medium and low temperature refrigeration systems but is not intended for air-conditioning applications nor recommended for use in systems with flooded evaporators. Overall system capacities and efficiencies of an R-407A retrofit will be similar to those of R-22 for the US.

Forane^® 407C (R-407C) is a non-ozone depleting, zeotropic blend of HFC refrigerants R-32, R-125, and R-134a, and has been formulated to match the properties of R-22 closely in air conditioning applications. Forane^® 407C can be used to replace R-22 in new or existing R-22 residential and commercial air conditioning systems as well as non-flooded evaporator chillers. R-407C is completely immiscible with mineral oil and will require a complete oil change to POE when retrofitting an R-22 installation.  Like other R22 retrofits, R-407C is a high glide blend and is therefore typically not recommended for use in a system with a flooded evaporator.

Forane^® 408A refrigerant (R-408A) is a low-ozone depleting, near-azeotropic HCFC-containing blend of R-22, R-125, and R-143a, designed to match the performance of R-502. Forane^® 408A is a retrofit solution for medium and low temperature refrigeration systems that are currently using R-502. R-408A should not be mixed with R-502 or used to top off the charge of an existing system operating on R-502. R-408A is not intended for use in new equipment. R-408A contains an HCFC and, as an ozone depleting refrigerant, is subject to phase out according to the Montreal Protocol international treaty and the Clean Air Act in the United States.

 

 

 

* Due to global regulations, this product can no longer be used or purchased in the European Union *

Forane^® 427A (R427A) is the ideal R22 retrofit for air conditioning, heat pumps, and refrigeration applications. Benefits include:

 

- Better efficiency than most R22 retrofits

- Comparable capacity to R-22

- Nearly identical pressures to R-22

- Lower discharge temperatures

- Mineral oil compatible

- No TXV replacement required

- Copeland Discus^TM and Bitzer approved

 

For Forane^® 427A retrofit stickers, please call customer service at (800) 245-5858 , press 0 (North America only).  To learn more about the retrofitting process, visit r22retrofits.com.

Forane^® 507A (R-507A) is a non-ozone depleting, azeotropic blend of HFC refrigerants R-125 and R-143a. R-507A has properties that match those of R-502 closely, making it a good refrigerant for some medium and most low temperature refrigeration applications. Forane^® 507A is approved by compressor and system manufacturers for use in new refrigeration equipment, such as food display and storage cases, cold storage rooms, transportation, and process refrigeration.

As a leading fluorine chemistry specialist, Arkema provides fluorospecialties development and production to key partners in various industries where fluorine makes a difference: agrochemical and pharmaceutical, lithium ion batteries, electronics, as well as catalysts and fine chemistry. Our fluorochemicals bring innovative, sustainable, and life improving solutions to our customers through development of efficient, industrial-scale processes and manufacturing of high purity fluorinated intermediates.
 

Building blocks for streamlined and cost-efficient fluorochemicals synthesis.  A variety of difluorocompounds (-CF2) and trifluorocompounds (-CF3) which add desired functionality to biologically active ingredients for the agrochemical and pharmaceutical industries.

Foranext® acid catalyst Boron Trifluoride, BF3 is an excellent chemical catalysts (lewis acid) for polymerization, pharmaceutical synthesis and fine chemistry. Arkema is one of the leading producers of gas Boron Trifluoride.

Arkema is a manufacturer of high purity fluorinated electronic specialty gases used in a variety of semiconductor solutions:

 

Process Applications:

 

• DRIE


• Plasma Etch


• Atomic Layer Etch


• Implantation


• Chemical Vapor Deposition


• Chamber Cleaning



 

 

Feature Solutions:

 

• High-Aspect Ratio Contact (HARC)


• Through Silicon Via’s (TSV)


• Side Wall Passivation



 

 

Devices:

 

• Logic


• NAND Memory


• MEMS


• SiP - System in Package

Arkema manufacturers advanced fluorogases, such as HCFC-142b and HCFC-22, which are used in the synthesis of fluoropolymers and fluoroeslatomers, such as polyvinylidene fluoride (PVDF) and polytetrafluoroethylene (PTFE).

 

• R142b - 1-Chloro-1,1-difluoroethane – CAS 75-68-3


• R22 – Chlorodifluoromethane – CAS 75-45-6