すべてのウェブサイト
  • 専門記事
  • バッテリー
EV battery expert discusses changes and challenges in the industry

Woldemar D'AMBRIERES, Global Market Manager for Batteries at Arkema, shared his ...

続きを読む
2024/09/23
  • ホワイトペーパー ・お役立ち資料
PVDF by Emulsion: the go-to Enabler for Solvent-free Technology in Battery Cell Manufacturing
2024/02/15
  • 専門記事
Mass balance solutions to accelerate the shift towards more circular solutions
2023/09/19
  • 専門記事
Shifting towards more sustainability: when the coating value chain act as one
2023/07/25
  • ケーススタディ
Case Study: Breathable and Lightweight 3D-Printed Cranial Orthosis with PA11
2023/01/24
専門記事
すべての記事
  • 専門記事
  • バッテリー
EV battery expert discusses changes and challenges in the industry

Woldemar D'AMBRIERES, Global Market Manager for Batteries at Arkema, shared his ...

続きを読む
2024/09/23
  • 専門記事
  • コーティング
  • サステナビリティ
  • bio-based-materials
Mass balance solutions to accelerate the shift towards more circular solutions

Today, the imperative to reduce GHG emissions and move to a more circular economy has permeated ...

続きを読む
2023/09/19
  • 専門記事
  • コーティング
  • サステナビリティ
Shifting towards more sustainability: when the coating value chain act as one
In April of this year, Arkema brought together leaders from across the coatings value chain to ... 続きを読む
2023/07/25
ホワイトペーパー
すべての記事
  • ホワイトペーパー ・お役立ち資料
  • 電気
  • バッテリー
PVDF by Emulsion: the go-to Enabler for Solvent-free Technology in Battery Cell Manufacturing

In recent years, the demand for high-performance batteries has surged, driven by the exponential ...

続きを読む
2024/02/15
  • ホワイトペーパー ・お役立ち資料
  • 3Dプリンティング
  • 複合材
Extrusion 3D printing: a comparison of flexible filaments

Recently, many flexible filaments have been introduced to the material extrusion printing ...

続きを読む
2022/07/29
ケーススタディ
すべての記事
  • ケーススタディ
  • 3Dプリンティング
  • サステナビリティ
Case Study: Breathable and Lightweight 3D-Printed Cranial Orthosis with PA11

Helmet molding treatment or Cranial orthosis is a treatment for correcting the shape of the ...

続きを読む
2023/01/24
  • ケーススタディ
  • 3Dプリンティング
  • 複合材
  • bio-based-materials
3Dプリントによるオーダーメイド:植物由来ナイロン11(PA11)を用いた医療用インソール(足底板)

医療用インソールは、医師・理学療法士・義肢装具士が連携して患者さん一人ひとりのニーズに合わせて製作する、高度にカスタマイズされた医療装具です。医療用インソールの製造と調整(フィッティング)には、 ...

続きを読む
2022/03/17
  • ケーススタディ
  • 自動車
  • 新エネルギー
Producing low whash out high performance conductive fuel lines for hybride cars and beyond with Rilsan® PA 11

Arkema’s target is to provide the automotive industry a complete range of new high ...

続きを読む
2022/03/15
Top